What are Rock Lights?

Rock lights are small pods that can be mounted on the underside of your vehicle for that coveted under-glow effect. They are ultra bright and come in a variety of colours for easy customization. Performance's LED rock lights come with mounting hardware for easy installation. They also have a rubber mounting spacer so you don't damage your vehicle. Rock lights come individually: grab a couple for a subtle look, or go all out with lots of pods in different colours. 

PerformLED Rock Lights currently come in the following colours:

• White
• Red
• Amber
• Blue
• Green

Not just for aesthetics, rock lights can also help with illuminating the road beneath you. Imagine yourself navigating a treacherous off-road trail at night, the only light source being the dim glow of your headlights. Suddenly, a hidden rock looms in the darkness, threatening to damage your vehicle. This is where rock lights come in. These small but powerful lights, strategically placed under your vehicle, illuminate the terrain below, allowing you to see obstacles and navigate with confidence.

Rock lights are LED lights specifically designed for off-road vehicles. They are typically mounted underneath the vehicle's chassis, shining downward to illuminate the ground directly below. This provides enhanced visibility, especially in low-light conditions or on challenging trails.

Why are Rock Lights Important?

• Enhanced Visibility: Rock lights significantly improve visibility, especially when maneuvering through tight spaces or over obstacles.
• Safety: By illuminating potential hazards, rock lights help prevent accidents and damage to your vehicle.
• Aesthetics: Beyond their functional benefits, rock lights can add a stylish touch to your vehicle, especially when customized with different colours and patterns.

The Science Behind Rock Lights

Rock lights utilize high-powered LEDs that produce a bright, focused beam of light. These LEDs are designed to be durable and resistant to vibration, water, and extreme temperatures. The color temperature of the light, typically measured in Kelvin (K), can vary. A lower color temperature (e.g., 3000K) produces a warmer, amber light, while a higher color temperature (e.g., 6000K) produces a cooler, white light.

Customizing Your Ride with Performance LED Lighting

Performance LED Lighting is a company that specializes in customizing vehicles with high-quality LED lighting solutions. We offer a wide range of rock light options, including different colours, and mounting configurations. With our expertise, you can create a unique lighting setup that matches your style and enhances your off-road experience.

Conclusion

Rock lights are an essential accessory for off-road enthusiasts, providing both functional and aesthetic benefits. By illuminating the terrain below, they enhance safety and improve the overall driving experience. When choosing rock lights, consider factors such as brightness, color temperature, durability, and ease of installation. And remember, with companies like Performance LED Lighting, you can customize your vehicle to your exact specifications.

So, are you ready to take your off-road adventures to the next level with rock lights?

 

Installing Rock Lights: A DIY Guide

Installing rock lights is a relatively straightforward process that can be done by most DIY enthusiasts. However, it’s important to follow the specific instructions provided by the manufacturer. Here’s a general guide:

Materials Needed:

• Rock lights
• Wiring harness
• Drill
• Wire stripper
• Electrical tape
• Zip ties
• Safety glasses
• Gloves

Installation Steps:

1. Plan the Placement: Determine the optimal placement for the rock lights. Consider factors like visibility, accessibility, and the overall aesthetic of your vehicle.
2. Drill Holes: Use a drill to create holes in the chassis or bumper where you want to mount the lights. Ensure the holes are the correct size for the mounting brackets.
3. Run the Wiring: Carefully route the wiring harness from the lights to the vehicle's interior, avoiding sharp edges and heat sources. Use zip ties to secure the wires and keep them organized.
4. Connect the Wiring: Connect the wiring harness to the vehicle's electrical system. This may involve splicing into an existing wire or connecting to an accessory power source. Consult your vehicle's manual or seek professional advice if you're unsure.
5. Mount the Lights: Secure the rock lights to the mounting brackets using the provided hardware. Ensure they are firmly attached to prevent vibration and damage.
6. Test the Lights: Before finalizing the installation, test the lights to ensure they are working correctly. Check for any loose connections or faulty wiring.
7. Seal the Wiring: Seal any exposed wiring with electrical tape to protect it from moisture and debris.

Tips for a Clean Installation:

• Choose High-Quality Components: Invest in quality rock lights and wiring harnesses to ensure a reliable and long-lasting installation.
• Take Your Time: Rushing the installation process can lead to mistakes. Take your time and be patient.
• Use a Wiring Diagram: A wiring diagram can help you visualize the connections and avoid errors.
• Consult a Professional: If you're unsure about any part of the installation process, consult a professional installer.

By following these steps and taking your time, you can successfully install rock lights and enhance your off-road experience.

Here are some popular locations for rock light installation:

Front of the Vehicle:

• Front Bumper: Mounting rock lights on the front bumper can illuminate the area directly in front of the vehicle, helping you see obstacles and potential hazards.
• Fender Wells: Placing rock lights in the fender wells can illuminate the tires and the immediate surrounding area, improving visibility when maneuvering through tight spots.

Sides of the Vehicle:

• Rock Rails or Side Steps: Mounting rock lights on rock rails or side steps can illuminate the sides of the vehicle, making it easier to see obstacles and potential hazards when driving on narrow trails or in low-light conditions.
• Door Jambs: Installing rock lights in the door jambs can provide additional illumination for the sides of the vehicle, especially when getting in and out at night.

Rear of the Vehicle:

• Rear Bumper: Mounting rock lights on the rear bumper can illuminate the area behind the vehicle, making it easier to see when backing up or maneuvering in tight spaces.
• Tailgate: Installing rock lights on the tailgate can provide additional illumination for the rear of the vehicle, especially when loading or unloading cargo at night.

Remember, the optimal placement of rock lights will depend on your specific vehicle and off-roading needs. Consider factors such as the terrain you typically drive on, the desired level of illumination, and the overall aesthetic of your vehicle.

Our personal favourite here at Performance is installing a rock light in each wheel well! This only requires 4 rock light pods are creates an incredible glow. 

Do you also want to customize your interior lights to match or complement your rock lights? Check out our selection of interior LED bulbs to complete the look. 

• Share on:
WhatsApp Deel Pin it Messenger Email